- Mathematics
- Class 9
- Project 12
12Architect for a Day: Drawing a Flat to Scale
Students design a two-bedroom flat of exactly 80 m² for a family of four. They draw the plan at a scale of 1 : 50, label every room with its dimensions and area, check that the room areas add up correctly, include doors that open safely and a window in every room, and calculate the percentage of space for living, sleeping, cooking and circulation.
- Class and age
- Class 9 · 14–15
- Activity type
- Individual
- Time needed
- 2 sessions of 45 minutes
- Difficulty
- Medium
- Estimated budget
- Almost free
Mathematical concepts
- Scale 1 : 50 (2 cm on paper = 1 m)
- Areas of rectangles and composite shapes
- Percentages of a total
- Architectural geometry: door swing as a quarter circle
- Constraints and trade-offs
Learning objectives
- Draw an accurate scale plan.
- Calculate and check room areas.
- Use percentages to analyse a design.
- Balance a design against real needs.
Real-life connection
Flats in Bangladeshi cities are advertised by area in square feet. Architects and engineers draw scale plans like this, and families compare them before buying or renting.
Materials required
- A3 squared or plain paper
- Ruler, set square, compasses, pencil and eraser
- Calculator
- Optional: a real flat advertisement plan for comparison
Step-by-step instructions
- List the rooms the family needs: two bedrooms, living-dining, kitchen, one or two bathrooms, a balcony and a corridor.
- Decide a sensible size for each room and check the total is 80 m².
- Choose the outer shape (for example 10 m × 8 m) and convert to the scale 1 : 50.
- Draw the outer walls, then divide the space into rooms.
- Add doors (draw each door's swing as a quarter circle) and windows.
- Label each room with dimensions and area.
- Calculate the percentage of the total area for each type of space.
- Convert the total area to square feet (1 m² ≈ 10.76 ft²) and compare your flat with a real advertisement.
Mathematical explanation
At 1 : 50, every metre becomes 2 cm on paper, so a 10 m wall is drawn 20 cm long. Areas scale by the square of the scale factor: 1 m² is drawn as 2 cm × 2 cm = 4 cm². Room areas must add up to the total, which is a strong check on the drawing. Circulation space (corridors) does not feel useful but is needed; good designs keep it small. Square feet are larger in number because 1 m is about 3.28 ft, so 1 m² ≈ 3.28² ≈ 10.76 ft².
Expected project output
A labelled 1 : 50 floor plan with room areas, a space-use percentage table and a comparison with a real plan.
Skills developed
- Scale drawing
- Area and percentage
- Spatial planning
- Design for real people
Assessment criteria
- The plan is drawn accurately at 1 : 50.
- Room areas are correct and total 80 m².
- Doors and windows are placed sensibly.
- Percentages and unit conversion are correct.
Extension challenge
Redesign the same flat so that every room gets cross-ventilation (windows on two sides). What do you have to give up?
Safety and inclusion
Use compasses carefully.