Art + Math + Science + English
  1. Mathematics
  2. Class 11
  3. Project 13
Mathematics Through Making and Construction

13Curves from a Torch and a String: Making the Conic Sections

Students shine a torch at a wall at different angles and watch the patch of light change from a circle to an ellipse, a parabola and a hyperbola. They then draw an accurate ellipse with two pins and a loop of string, a parabola by folding paper, and investigate the reflecting property of each curve. They measure their drawings and check them against the equations of the conics.

Class and age
Class 11 · 16–17
Activity type
Individual or group
Time needed
90 minutes
Difficulty
Medium
Estimated budget
৳0–৳50

Mathematical concepts

  • Conic sections as slices of a cone
  • Ellipse: sum of distances to two foci is constant
  • Parabola: equal distance from a focus and a line
  • Equations x²/a² + y²/b² = 1 and y = x² ÷ (4p)
  • Reflecting properties

Learning objectives

  • See how the four conics arise from one cone.
  • Construct an ellipse and a parabola from their definitions.
  • Check constructions against equations.
  • Explain real uses of their reflecting properties.

Real-life connection

Planets move in ellipses; satellite dishes, car headlights and solar cookers are parabolic; some navigation systems used hyperbolas. Whispering galleries work because of the ellipse's reflecting property.

Materials required

  • A torch with a round beam
  • Two drawing pins, a loop of string (about 30 cm), a board or thick card
  • Tracing or baking paper for folding, ruler, pencil

Step-by-step instructions

  1. In a darkened room, point the torch straight at a wall: a circle. Tilt it slowly and sketch each shape.
  2. Find the tilt at which the edge of the light patch stops closing: the parabola. Tilt further: the hyperbola.
  3. Push two pins into card 12 cm apart. Put the string loop around them and draw a curve with a pencil keeping the string tight.
  4. Measure the longest and shortest widths (2a and 2b). Check that b² = a² − c², where 2c is the distance between the pins.
  5. Mark a point (the focus) and a straight line on tracing paper. Fold the line onto the focus many times; the creases outline a parabola.
  6. Measure the focus distance p and check a few points against y = x² ÷ (4p).
  7. Test the reflecting property: on the ellipse, draw lines from one focus to the curve, reflect them, and see where they go.
  8. Make a poster of the four conics with their definitions, equations and one real use each.

Mathematical explanation

The beam of a torch is a cone of light, and the wall slices it. A slice square to the cone's axis is a circle; a tilted slice is an ellipse; a slice parallel to the cone's edge is a parabola; a steeper slice is a hyperbola. The string method works because the string length fixes the sum of the distances from any point on the curve to the two pins: exactly the definition of an ellipse. Folding a line onto a point creates creases that are tangents to the set of points equally far from the point and the line: the parabola. A parabola reflects rays parallel to its axis through the focus, which is why satellite dishes are shaped this way.

Expected project output

Torch sketches, a string-drawn ellipse and a folded parabola with measurements checked against equations, and a conics poster.

Skills developed

  • Geometric construction
  • Connecting definitions with equations
  • Observation and sketching
  • Science and engineering links

Assessment criteria

  • All four conics are observed and sketched.
  • The ellipse and parabola are constructed accurately.
  • Measurements are checked against the equations.
  • The poster explains definitions and uses correctly.

Extension challenge

Draw ellipses with the pins 4 cm, 8 cm and 12 cm apart using the same string. How does the shape change? This is the eccentricity.

Safety and inclusion

Never shine a torch into anyone's eyes. Handle pins carefully and move around a darkened room slowly.