Art + Math + Science + English
  1. Mathematics
  2. Class 10
  3. Project 22
Mathematics Through Innovation and Problem Solving

22Sun on the Roof: Planning Solar Panels for the School

The school wants solar panels on its flat roof. Teams find the right tilt angle, use the lowest noon sun of the year to calculate how far apart rows must be so that panels do not shade each other in winter, and work out how many rows fit on the roof. They estimate the daily energy the system could produce using figures from panel datasheets, and present a design to the school.

Class and age
Class 10 · 15–16
Activity type
Group
Time needed
2 sessions of 60 minutes
Difficulty
Challenging
Estimated budget
Almost free

Mathematical concepts

  • Sine for the height of a tilted panel
  • Tangent for shadow length
  • Angle of the sun from latitude and season
  • Fitting rows into a fixed length
  • Estimation of energy

Learning objectives

  • Use sine and tangent together in a design problem.
  • Use the worst case (winter) to make a design safe.
  • Fit a layout into a real space.
  • Estimate and communicate the benefit of a project.

Real-life connection

Bangladesh has installed solar systems on many homes, schools and factories. Installers must choose tilt angles and row spacing carefully, because even a small shadow can greatly reduce a panel's output.

Materials required

  • Roof dimensions (from the school office or measured safely from plans)
  • A solar panel datasheet (size and rated power) from a supplier website
  • Scientific calculator, squared paper

Step-by-step instructions

  1. Find your town's latitude (for example, Dhaka is about 23.8° N). A common rule of thumb is to tilt panels facing south at about the latitude.
  2. A panel 1.6 m long tilted at 24° rises to a height of 1.6 × sin 24°. Calculate it.
  3. The lowest noon sun of the year (around 21–22 December) has an elevation of about 90° − latitude − 23.4°. Calculate it for your town.
  4. Find the length of the shadow behind a panel at that time: shadow = height ÷ tan(elevation).
  5. Row pitch = horizontal length of the panel (1.6 × cos 24°) + shadow length. Calculate it.
  6. Using the roof length, find how many rows fit, and how many panels fit in each row.
  7. Use the datasheet power and a sunshine-hours figure supplied by the teacher to estimate daily energy.
  8. Draw the layout to scale and present the design and its expected output to the school.

Mathematical explanation

A 1.6 m panel at 24° stands 1.6 × sin 24° ≈ 0.65 m high and covers 1.6 × cos 24° ≈ 1.46 m of roof. For Dhaka the winter noon sun is about 90 − 23.8 − 23.4 = 42.8° high, so the shadow is 0.65 ÷ tan 42.8° ≈ 0.70 m. Each row therefore needs about 1.46 + 0.70 ≈ 2.16 m. Designing for the lowest sun means there is no shading at noon on any day of the year. (In early morning and late afternoon the sun is lower still, so real installers often allow a little more space.)

Expected project output

Calculations of panel height, winter sun angle and row spacing, a scale roof layout and an energy estimate presented to the school.

Skills developed

  • Trigonometry in engineering design
  • Worst-case thinking
  • Spatial planning
  • Communicating a proposal

Assessment criteria

  • Panel height and horizontal length are correct.
  • The winter sun angle and shadow are correct.
  • The number of rows and panels fits the roof.
  • The energy estimate uses stated sources and assumptions.

Extension challenge

Compare tilts of 10°, 24° and 35°. A flatter tilt allows closer rows and more panels; a steeper tilt may suit winter better. Which gives more panels on the roof?

Safety and inclusion

Do not go on the roof without permission and adult supervision; use plans and drawings instead. Never touch electrical equipment or wiring.